What is a Laser Marking Machine?

Laser Marking Machine introduction:

Laser marking machine can mark in a variety of different materials’ surface with a permanent mark. Marking effect is through the material surface to reveal the deep material evaporation, which engraved exquisite patterns, trademarks and text.

---The principle of laser marking machine:

1. “Thermal processing "has a high energy density of the laser beam (which is a concentrated energy flow), irradiated on the surface of the material being processed, the material surface absorbs laser energy, in the irradiation area to generate a thermal excitation process, so that the material surface (or coated Layer) temperature rise, resulting in metamorphosis, melting, ablation, evaporation and so on.

This way the laser marking machine can be divided into:

CO2 laser marking machine

fiber laser marking machine

2. “Cold processing" has a very high energy photon, can interrupt the material (especially organic materials) or the surrounding medium chemical bonds, to the material non-thermal process damage. This cold work has a special meaning in laser marking processing. Because it is not a thermal ablation, so the processed surface layer and the area does not produce heating or thermal deformation.

It including:

UV laser marking machine

Green laser marking machine

Infrared laser marking machine

----Marking materials difference:

I. YAG laser marking machine only can mark on metal materials, such as steel, brass, aluminum, etc.

II. Co2 laser marking machine main used to work on nonmetal materials, such as wood, leather, glass, paper etc.

III. Fiber laser marking machine can used on almost all the metal and nonmetal materials except wood and transparent materials(glass, acrylic).

IV. UV, green and Infrared laser main use in high-end extremely fine IC product marking, price is high.

NOTE: Due to YAG laser has so many consumable parts and difficult setting,so now YAG laser almost not selling in the market. Most work can be replaced by the fiber laser.

Co2 laser marking machine:

It can engrave on most non-metallic materials: paper, leather, wood, plastic, plexiglass, fabric, acrylic, bamboo, rubber, crystal, jade, ceramics, glass and artificial stone.

The co2 laser source can choose Chinese glass tube, and imported metal laser tube, the main brand is Synrad, coherent and Rofin.

The difference is the lifespan, the glass tube lifespan about 3000-5000 hours, the metal tube lifespan is about 20000-40000 hours.The metal tube can be air inflation for reuse.

STJ-80C	STJ-30C	STJ-30C-Flying
This model main adopt glass tube 50W,80W,100W,130 and 150W.All water-cooling.	This type with Synrad, coherent or Rofin metal tube, the tube is short, low power is air-cooling, The power has 10W, 30W, 50W, etc.	This type with conveyor belt for production line working, such as food package bags, plastic bottles, etc.

Fiber laser marking machine:

Fiber lasers are divided into two main categories: Q-switch fiber laser and MOPA fiber laser.

Q-switch: 10W,20W,30W, 50W (Main brand is Max and Raycus, Max is cheaper, and Raycus quality is better)

MOPA: 20W M1+,20W M6+,30W M1+,30W M6+,(LM1-60W/70W/100W/120W/150W/200W for choose, expensive, almost no use in marking)

The difference between Q-switch and MOPA, please check from STYLECNC website:

https://www.stylecnc.com/cnc-solutions/The-difference-between-MOPA-and-Q-switch-laser-marking-machine.html

It has the characteristics of good beam quality, small volume, fast speed, long working life, flexible installation and maintenance. Widely used in integrated circuit chips, computer accessories, industrial bearings, watches and clocks, electronic and communications products, aerospace devices, all kinds of auto parts, home appliances, hardware tools, molds, wire and cable, food packaging, jewelry, tobacco and military Field graphics and text markings.

STYLECNC Laser Marking Machine design for choose:

Mini type	Portable type	Stand type
Flying type	Stand enclosed type	Small enclosed type

S2 cabinet furniture CNC router with 5+4 gang drills

CNC Router Functions:

Intelligent full automatic CNC router S2 for panel furniture production is one highly automated nesting solution with Automatic Loading system,Automatic pushing system and Automatic convey belt uploading system. The complete work cycle of loading, nesting, drilling ,cutting,engraving and unloading is carried out automatically, which instead of the workers,eliminating error,improve the output and reduce the cost.

Intelligent mark positioning laser marking machine

Intelligent mark positioning laser marking machine features:

1. Intelligent mark positioning laser marking machine is a low-cost, simple and effective tool which in conjunction with BJJCZ software, allows the user to have an accurate and detailed view of exactly what is makring on the table from the marking scan head.

2. The Cyclops camera is mounted on the marking head and looks at the whole area of the marking table below the head. The image from the camera can be displayed on software in the computer. 

3. Cyclops system match the marking area and camera view area. Used Background show software and Calibration software.

4. The Cyclops camera position scan head and camera locate in same coordinate system after calibrate. Scan speed of cyclops is above 5000mm/s.

Laser marking machine with cyclops system advantages:

1. No need extra camera.

2. No need red light.

3. No need manul focal length setting

4. Draw where, mark where.

Technical parameters of fiber laser marking machine with cyclops system:

Model	STJ-30F
Laser power	30W Raycus (JPT MOPA type for choose)
Supports graphical format	PLT, BMP, JPG, PNG, TIP, PCX, TGA, ICO, DXF
Beam quality	m2<2
Power stability	(8h) <± 1% rms
Pulse repetition frequency	20KHZ ---- 100KHZ
Power consumed	<800W
Minimum line width	50μm
Minimum character	0.3mm
Laser Wavelength	1064nm
Galvanometer Size	110 * 110mm (optional)
Whole machine power	500w
Cooling way	Air cooling
Operating voltage	110/220V ± 10% /,50/60HZ
Ambient operating temperature	15 ° C - 35 ° C
Weight	90KG
Dimensions	75*47*107cm
Packing	plywood wooden packaging

STYLECNC supply all kinds of Laser Marking machine, welcome to inquiry with detail requires.

Fiber laser cutting machine cutting stainless steel as automotive accessories

500W/1000W/2000W Fiber laser cutting machine applied in sheet metal processing, stainless steel cutting, automotive accessories, aviation, spaceflight, electronics, electrical appliances, subway parts, automobile, machinery, precision components, ships, metallurgical equipment, elevator, household appliances, gifts and crafts, tool processing, adornment, advertising, metal foreign processing various manufacturing processing industries. Learn more and buy such a fiber laser cutting machine, please visit: https://www.stylecnc.com/fiber-laser-cutting-machine/fiber-laser-cutter.html
or contact us with:
Email: info@stylecnc.com
Skype: stylecnc
Whatsapp: +86-18766148818

A guide to choose a China CNC router manufacturer

China CNC router market is now in the direction of the market gradually with professional and subdivision, China CNC router manufacturers more and more professional service, engraving equipment operation is more and more convenient to the public.

CNC router is also a step by step to the occurrence of technological innovation. Differentiation of products, simple operation, and the company scale and service system. CNC router now in many industries have a greater role, such as stone carving, carved furniture, construction and decoration industries can obtains the widespread application. Users in different sectors of CNC routers have different needs, China CNC router manufacturers follow the sculpture making orientation of the industry, constantly updated equipment carving, with the development of engraving industry, market of CNC router manufacturer put forward higher requirements.

The large-scale development of the CNC router, people also pay more attention to the humanization of automatic operation. With the demand for large-scale production, more concise, user-friendly operating system become the China CNC router manufacturing enterprises urgently need to solve the problem, more concise, user-friendly operating system enable a control multiple CNC router possible. With the gradual intensification of competition in the industry, only the high price, perfect after-sales service machinery will be more favored customers.

The increase of competitors, making China CNC router manufacturers continue to reduce production costs, as well as maintenance costs, in order to improve efficiency and achieve customer satisfaction.

According to the marketing situation and development trend of China CNC router, How to choose the right China CNC router manufacturer? STYLECNC tell you the key points as following:


1. Brand awareness

2. Production scale

3. Manufacturer reputation

4. Technology capability

5. Delivery time

6. Warranty

7. After-Sales Service

Laser cutting machine VS Plasma cutting machine

The working principle of plasma cutting machine is based on oxygen or nitrogen as the working gas, use high temperature plasma arc quantity of heat to make the workpiece incision of the metal local melting and evaporation, and with the help of a high speed of the plasma momentum ruled out a molten metal to form a slot of a kind of machining method. 

Laser cutting machine is a laser beam of light produced by a laser, through a series of mirror transmission, finally by the focus lens on the workpiece surface, produce local high temperature at focus, make the artifact is added hot melt or instant vaporization slot. And assist in the process of cutting gas would slot in slag blow out, ultimately achieve the purpose of processing. 

Laser cutting machine VS Plasma cutting machine

Plasma cutting is suitable for cutting various metal materials, mainly in thick plate cutting. Advantage is cutting speed, narrow slot, small heat affected zone, the deformation is small, operation cost is low; Defect is in the cross section vertical degree is 0.5 ° ~ 1.5 ° Angle, hardening of incision. 

Laser cutting, mainly in sheet cutting material range is very wide (metal, nonmetal, ceramics, glass, etc.). Due to the direction of laser with high, high brightness, high strength etc., so the laser cutting speed, high machining accuracy, cutting is very narrow, subsequent processing are generally not required. 

To sum up, in terms of cutting materials, laser cutting of material selection range is wider than plasma cutting; In terms of sheet cutting, laser cutting is more significant advantage; And in terms of cost, plasma cutting relative to the laser cutting is a lot cheaper. 

Compared with general way of cutting, laser cutting machine has some significant advantages: 

1. small laser cutting slot, cutting surface can be directly used for welding, don't need to be polished. 

2. laser cutting machine speed: cutting thin plate speed can be up to 10 m/min, much faster than the speed of plasma cutting machine. 

3. good cutting quality of the laser cutting machine, small deformation, surface roughness value is low, oblique piece. 

4. high precision laser cutting machine, precision can reach 0.05 mm, repetitive positioning accuracy can reach 0.02 mm. 

5. laser cutting machine cutting materials widely: besides can cut metal, also can cutting wood, plastic, rubber, PVC, leather, textiles, and organic glass, and other materials, a wide range of application. 

The disadvantage of laser cutting machine: laser cutting cost is high, the initial investment and maintenance needs higher cost; At present, laser cutting thin plate high cost performance, but when the cutting plate efficiency is low, unless the quality of the demand is higher, or inappropriate use laser cutting. 

The advantage of plasma cutting machine: thick plate in cutting process, can achieve very high cutting speed, far higher than that of laser and flame. Late early than low laser equipment, the maintenance cost is lower than the laser. 

Plasma cutting disadvantages: 

1. poor perpendicularity of the cut surface: on one side of the cutting surface will produce very big bevel, vertical degree will be poor.  

2. to produce more cutting slag on the surface of the cutting process in cutting down cutting slag, as does not affect the quality of the process, after the cutting slag must be through grinding, also increased labor costs. 

3. will produce harmful gas and arc: plasma cutting principle determines the cutting process will produce harmful dust and arc, however, at present also appeared to avoid the defect of underwater plasma cutting. 

4. cutter consumption will be more late, and now the cutting nozzle mainly depend on import, the cost is higher. 

According to the experience of we used before, laser cutting machine and plasma cutter machine is as follows: 

1. will not damage parts, laser cutting machine and plasma cutting machine to plank is big or small injury, especially in the process of cutting plasma cutting machine cutting torch nozzle problems arise will cause obvious flaw to the plate. 

2. because of the focused laser beam into very small points of light, so narrow kerf width laser cutting machine, plasma cutting machine cutting of the cutting seam than laser cutting machine cutting seam slightly larger. 

3. laser cutting machine speed, cutting speed can be up to 10 m/min, much faster than the speed of plasma cutting machine. 

4. laser cutting machine cut surface is smooth, without burr, cutting quality is good, is a non-contact cutting, trimming heat effect is very small, almost no thermal deformation of workpiece, completely avoid material formed when punching and shearing edge collapse, generally do not need secondary processing kerf width. But the thickness of the cutting board restricted and high processing cost. And plasma cutter according to the different type and size can be cut power over 6 ~ 40 mm steel plate, processing costs are relatively cheap. 

5. high precision laser cutting machine, laser cutting machine positioning accuracy of 0.05 mm, repetitive positioning accuracy of 0.02 mm, but the working environment demand is high, plasma cutting machine, laser cutting machine machining precision is not better than, but low requirements for the work environment and strong maneuverability, adapt to a wider range of cutting, skills water quality requirements for the personnel relatively lower laser cutting. 

The advantages of laser cutting machine is cutting accuracy is higher, faster, plate deformation is small, suitable for complex shape parts inventories, but right now my company's equipment, cutting thickness is restricted, generally: 8 mm the following sheet, set piece using the laser cutting machine with relatively high precision blanking, the material cost is higher, to the purity of the plate also to have certain requirements. 

The advantage of plasma cutting machine is cutting area wide, can cut all sheet metal; Quick cutting speed, high efficiency; Cutting accuracy is higher than CNC flame cutting, fine plasma cutting has higher precision. Drawback is that cut thick plate, especially more than 20 mm steel plate is difficult, need high power plasma power supply, the high cost. 

Original source from https://www.stylecnc.com, if you want to copy, please indicate the primary source: 

https://www.stylecnc.com/products/laser-cutting-machine.html

https://www.stylecnc.com/plasma-cutter/

STYLECNC® 6090 CNC router for wooden relief buddha engraving

6090 CNC router

STYLECNC® 6090 CNC router is used for wooden relief buddha engraving, advertisement engraving and cutting, stone processing, mold manufacturing, wood processing, craft manufacturing, light box cutting, building model cutting, indoor decoration cutting, light equipment mold processing, sign and mark manufacturing, acrylic board processing, etc.

STYLECNC® 6090 CNC router is suitable for the materials such as Stone,Wood, aluminum board, plastic, density board, wave board, PVC, PCB, acrylic, crystal, light marble and other nonmetal materials and light metal material. 

Features of our 6090 CNC wood router:

1. Thicker & Stronger Cast iron frame body much stronger than other Aluimnum frame, make the machine more stable & much better bearing capacity. 

2. 1.5KW China best Air or Water cooling spindle China top quality Changsheng brand, More durable & much lower nose & longer life-time 

3. Taiwan HIWIN Linear Guide for Y axis Top brand Taiwan imported with global service. 10 times longer life- time than round rail or the common brand linear rail. More stable, lower noise, harder to distort. 

4. Taiwan TBI ball screw High precision top brand Taiwan imported TBI Ball Screw 

5. Separated control box It has 2 separated parts which can prevent electrostatic interferenceWires, high soft shielding twisted-pair cable, fire-resistant and with low failure rate, could be bent min 30,000,000 times 

6. Top brand electric part: Japanese Omron limit switch 

7. Tool calibration sensor(Tool auto-checking instrument) 

① More easier tofind the working original home, avoid the manual error, save time. 

② Ensure the accuracy. 

8. Tool Box (free Accessories) Including ArtCAM/Type3 Software CD, Water pump, Clamps, Tool holder, Collet, Collet nut, Wrench, Port cable, Power cable, 18 pieces CNC Tool Bits 

9. Offline operated DSP control system / Computer controller Economical NCstudio controller DSP handle controller with USB port, no need to connect into the computer when operate machine, support offline operation, very popular & easily- operated.